XLR V8-4.6L VIN A (2006)
6. Turn the pump bypass valve (1) clockwise until the valve stops.
7. Close the rear compartment.
8. Remove the protective covering.
9. Install the support and the carpet over the hydraulic pump.
Important: Align the closeout panels evenly from front to rear. Gaps should exist between the 3 closeout panels.
10. Verify that the closeout panel is properly aligned. Refer to Folding Top Clearance Gap Specifications.
11. Adjust the closeout panel, if necessary. Refer to Folding Top Storage Compartment Closeout Panel Adjustment - Front.
12. Cycle the folding top under power through one complete cycle in both directions.
13. Inspect the folding top for proper operation.
Folding Top Storage Compartment Closeout Panel Replacement - Front Outer
Folding Top Storage Compartment Closeout Panel Replacement - Front Outer
Removal Procedure
1. Place the folding top in the up position.
2. Open the rear compartment.
