XLR V8-4.6L VIN A (2006)
5. Remove the cylinder hose (1). Use a clean shop towel to control any hydraulic fluid leakage.
6. Remove the cylinder hose O-ring (1).
Important: Replacement cylinders are filled with fluid. Do NOT remove the port plug from the cylinder until you are ready to connect
the cylinder hose.
7. Using a small flat-bladed tool, release one of the port plug retainer clips from the replacement cylinder.
8. Remove the retainer clips from the replacement cylinder.
9. Remove the port plug from the replacement cylinder.
10. Remove the port plug O-ring from the replacement cylinder.
Assembly Procedure
