XLR V8-4.6L VIN A (2006)
7. Install the hydraulic cylinder and the actuator arm to the latch (1).
8. Install the hydraulic cylinder retainer cover (2).
9. Install the spring-clip (3) to the hydraulic cylinder retainer cover.
10. Install the C-clip (4) to the latch actuator shaft.
11. Secure the hydraulic cylinder lines to the folding top panel with new tie wraps.
12. Remove the protective covering.
13. Manually close the folding top. Refer to Folding Top Manual Operation.
14. Cycle the folding top under power through one complete cycle in both directions.
15. Inspect the folding top for proper operation.
16. Install the headliner.