XLR V8-4.6L VIN A (2006)
1. Position the trim cover over the seat cushion foam.
2. Install the cover to the seat frame.
3. Install the attaching retainers from the cover to the seat frame.
4. Install the rear flap ends together. Engage the hook and the loop.
5. Install the driver seat rear panel bracket.
6. Install the driver seat finish pane.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the seat belt buckle and the pretentioner to the seat frame.
Tighten the mounting nut to 40 N.m (29 lb ft).
8. Install the seat.