XLR V8-4.6L VIN A (2006)
7. Install the remainder of the weatherstrip leg to the folding top panel (2), using a fiber stick (1) to push the secondary seal (3) behind the panel.
Notice: Refer to Fastener Notice in Service Precautions.
8. Install the weatherstrip retainer screws (1).
Tighten the screws to 3 N.m (27 lb in).
9. Remove the protective covering.
10. Operate the folding top under power through one complete cycle in each direction.
11. Inspect the folding top for proper operation.
