chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Driver or Passenger Seat Back Cushion Frame Replacement|Page 10118 > < Driver or Passenger Seat Back Cushion Frame Replacement|Page 10116
Page 20
background image

8. Remove the seat back and the seat back hinges from the seat back frame.
9. Remove the armrests. Refer to Rear Seat Armrest Replacement (YC7)   (See: Service and Repair/Rear Seat Armrest Replacement (YC7))Rear Seat

Armrest Replacement (YC5 and YC6)   (See: Service and Repair/Rear Seat Armrest Replacement (YC5 and YC6)).

10. Remove the bolts that retain the seat back seat back hinges to the seat back frame.
11. Remove the seat back hinges from the seat back frame.

Installation Procedure

1. Install the seat back hinges to the seat back frame.

Notice:  Refer to Fastener Notice in Cautions in Notices.

2. Install the bolts that retain the seat back hinges to the seat back frame in the locations noted during disassembly.

   Tighten the bolts that retain the seat back hinges to the seat back frame to 30 Nm (22 lb.ft.).

3. Install the armrests. Refer to Rear Bench Seat Replacement   (See: Service and Repair/Rear Bench Seat Replacement).

4. Install the seat back and seat back hinges to the seat.

5. Install the bolts that retain the seat back hinge to the seat cushion frame in the locations noted during disassembly.

   Tighten the bolts that retain the seat back hinge to the seat cushion frame to 30 Nm (22 lb.ft.).

Driver or Passenger Seat Back Cushion Frame Replacement|Page 10118 > < Driver or Passenger Seat Back Cushion Frame Replacement|Page 10116