Astro Van 2WD V6-4.3L VIN W (2001)
Brake Adjuster: Service and Repair
Drum Brake Adjusting Hardware Replacement
Drum Brake Adjusting Hardware Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake drum.
4. Remove the brake shoe return springs.
5. Remove the brake shoe guide.
6. Remove the hold down springs.
7. Remove the hold down pins.
8. Remove the actuator lever and the actuator lever pivot.
9. Remove the actuator lever and the lever pivot.
10. Remove the lever return spring.
11. Inspect all remaining parts for discoloration due to heat or stress. Replace parts as needed.
