Astro Van 2WD V6-4.3L VIN W (2001)
3. Use the J 29193 in order to install the connecting rod ball stud to the pitman arm.
Ensure that the seal is on the stud.
-
Tighten the J 29193 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
4. Remove the J29193.
5. Install the new prevailing torque nut (2) to the connecting rod (1) ball stud at the pitman arm (3).
-
Tighten the connecting rod to pitman arm prevailing torque nut to 62 Nm (48 ft. lbs.).
6. Lower the vehicle.
