Aveo L4-1.6L (2008)
Tighten the wheel cylinder-to-backing plate bolt to 8 N.m (71 lb in).
2. Connect the brake line to the wheel cylinder.
Tighten the brake line to 16 N.m (12 lb ft).
3. Install the shoe and lining, and the brake drum. Refer to Brake Shoe Replacement (See: Brake Shoe/Service and Repair).
4. Bleed the brakes. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair).
