C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
13. Install the crossbar RWD vehicle.
^
Tighten the bolts to 100 Nm (74 ft. lbs.).
14. Install the crossbar 4WD vehicle.
^
Tighten the bolts to 100 Nm (74 ft. lbs.).
15. Install the oil pan skid plate (RWD shown).
^
Tighten the bolts to 20 Nm (15 ft. lbs.).
16. Install the oil filter and the oil pan drain plug.
17. Lower the vehicle.
18. Fill the engine with oil.