Clutch Master Cylinder Replacement | C 3500 HD Truck 2WD V8-65L DSL Turbo (2001)
1. Position the clutch master cylinder to the vehicle.
2. Install the master cylinder to dash panel.
3. Turn the master cylinder 45 degrees counter clockwise to lock the master cylinder.
4. Connect the wire harness to the clutch master cylinder.
5. Push the clutch pedal all the way down and connect the clutch pedal pocket to the pushrod bushing tabs and make sure the pushrod bushing snaps
into place to ensure proper clutch pedal operation.
6. Quick connect the hydraulic line to the master cylinder.
7. If needed, pump the clutch pedal 25 times for proper operation of the clutch system.
