C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
![background image](/chevrolet/c_3500_hd_truck_2wd/v8-8.1l_vin_g/Page-564005.png)
11. Install the spark plug wires to the ignition coils.
12. Position the ECT sensor and bracket.
13. Install the ECT sensor bracket bolt.
Tighten the ECT bracket bolt to 50 Nm (37 ft. lbs.).
14. Connect the ECT sensor electrical connector (1).
15. Connect the ignition coil harness electrical connector (2).
16. Install the CPA retainer to the ignition coil electrical connector.