C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
5. Install the exhaust manifold heat shield bolts and nuts.
Tighten the exhaust manifold heat shield bolts and nuts to 25 Nm (18 ft. lbs.).
6. Install the EGR pipe and NEW gaskets.
7. Install the EGR pipe bolts to the adapter plate until snug.
8. Install the EGR pipe nuts to the exhaust manifold until snug.
9. Install the EGR pipe bracket bolt until snug.
^
Tighten the EGR pipe bolts to the adapter plate to 30 Nm (22 ft. lbs.).
^
Tighten the EGR pipe nuts to the exhaust manifold to 30 Nm (22 ft. lbs.).
^
Tighten the EGR pipe bracket bolt to 50 Nm (37 ft. lbs.).
10. Install the spark plugs.
11. If equipped, install the AIR pump pipe.
12. If equipped, install the AIR pump pipe bolt to the cylinder head.