C 3500 HD Truck 2WD V8-8.1L VIN G (2002)
Tighten the AIR pump pipe bolt to 50 Nm (37 ft. lbs.).
13. If equipped, install a NEW AIR pipe gasket and the AIR pipe.
14. If equipped, connect the AIR pipe to the AIR pump pipe.
15. If equipped, install the AIR pipe bolts to the exhaust manifold.
Tighten the AIR pipe bolts to 25 Nm (18 ft. lbs.).
16. If equipped, install the AIR pipe nut to the fuel rail stud.
Tighten the AIR pipe nut to 12 Nm (106 inch lbs.).
17. Install the oil level indicator tube.
18. Raise the vehicle.
19. Raise the catalytic converter into position.
20. Install the exhaust manifold seals.
21. Install the catalytic converter nuts.
Tighten the catalytic converter nuts to 64 Nm (47 ft. lbs.).
22. Lower the vehicle.