chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Tightening Torque|Page 2157
Page 1
background image

Vehicle Lifting: Service and Repair

LIFTING AND JACKING THE VEHICLE

Caution: To help avoid personal injury, always use jack stands when you are working on or under any vehicle that is supported only by a jack.

Caution: To help avoid personal injury, when a vehicle is on a hoist, provide additional support for the vehicle at the opposite end from which
you are removing components. The additional support will reduce the possibility of the vehicle falling off the hoist. When you are removing
major components from the vehicle while the vehicle is on a hoist, chain the vehicle frame to the hoist pads at the same end from which you are
removing the major components to prevent tip-off. If you fail to follow these precautionary measures, vehicle damage, serious personal injury,
or death may result.

Notice: When you are jacking or lifting a vehicle at the frame side rails or other prescribed lift points, be certain that the lift pads do not contact the
catalytic converter, the brake pipes, or the fuel lines. If such contact occurs, vehicle damage or unsatisfactory vehicle performance may result.

Engine, Cooling and Exhaust > < Tightening Torque|Page 2157