Camaro V8-6.2L (2010)
7. Disconnect the park brake indicator switch electrical connector.
8. Remove the park brake lever nuts (1).
9. Remove the park brake lever assembly.
Route the front park brake cable and grommet through the hole in the driveline tunnel.
Installation Procedure
1. Route the front park brake cable and grommet through the hole in the driveline tunnel.
2. Install the park brake lever assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the park brake lever nuts (1) and tighten to 22 Nm (16 lb ft).
4. Connect the park brake indicator switch electrical connector.
5. Install the front floor console. Refer to Front Floor Console Replacement (See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Front Floor Console Replacement).
