Camaro V8-6.2L (2010)
11. Tighten the camshaft sprocket bolt
Note: Do Not re-use camshaft sprocket bolt. New sprocket bolt must be used.
1. Tighten the bolt a first pass to 75 Nm (55 lb ft).
2. Tighten the bolt a final pass an additional 50 degrees using J 45059.
12. Remove the J 42386-A (1) and bolts.
13. Install the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (See: Engine Lubrication/Oil Pump/Service and
Repair).