chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Wheel Alignment Measurement|Page 8163 > < Wheel Alignment Measurement|Page 8161
Page 1
background image

Alignment: Service and Repair
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

1. Before performing any adjustment affecting the wheel alignment, refer to Wheel Alignment Measurement   (See: Wheel Alignment Measurement).

2. Ensure that the steering wheel is set in a straight ahead position. 
3. Loosen the tie rod jam nut (5). 
4. Adjust the toe to specification by turning the adjuster (6). Refer to Wheel Alignment Specifications   (See: Specifications/Wheel Alignment

Specifications). 
Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

5. Install the tie rod jam nut (5) and tighten to 68 Nm(50 lb ft)

Wheel Alignment Measurement|Page 8163 > < Wheel Alignment Measurement|Page 8161