Camaro V8-6.2L (2010)
Caution: Caution should be taken when trying to remove the power steering oil cooler hoses from the power steering oil cooler. Applying
excessive force or pulling on the port could cause the port to break off and warrant a complete replacement of the assembly.
6. Disconnect the power steering fluid cooler outlet hose (3) from the power steering fluid cooler outlet port (1) on the air conditioning condenser.
Cap the power steering fluid cooler outlet port.
7. Remove the bolt and separate the bracket from the front frame.
8. Remove the power steering fluid cooler outlet hose from the vehicle.
Installation Procedure
1. Plug the cooler end of the power steering fluid cooler outlet hose.
2. Position the power steering fluid cooler outlet hose on the front frame.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the bracket to the front frame with the bolt and tighten to 9 Nm (80 lb in).
