Camaro V8-6.2L (2010)
10. Install the NEW propeller shaft bolts (1) to the rear differential drive flange to tighten to 115 Nm (85 lb ft).
11. Install the center support bearing bolts (1) and tighten to 22 Nm (16 lb ft).
12. Remove the exhaust heat shield. Refer to Exhaust Muffler Intermediate Heat Shield Replacement (See: Engine, Cooling and Exhaust/Exhaust
System/Muffler/Service and Repair/Exhaust Muffler Intermediate Heat Shield Replacement).
13. Remove the support and lower the vehicle.
