Caprice Wagon V8-350 5.7L (1994)
a.
Remove the red 10 gauge (5.0) jumper wire and terminals from cavities K2 and C4. Discard this wire.
b.
Remove the blue 10 gauge (5.0) wire and terminal from cavity B6. Cut off the terminal and discard. Tape the wire end.
c.
Remove the brown 22 gauge (.35) wire and terminal from cavity B4 and the green 22 gauge (.35) wire and terminal from cavity C6. These
wires will be used in Step 7.
6.
Locate connector C103, just in front of the electrical center (Figure 4). Unplug the connector, then remove the blue 10 gauge (5.0) wire and
terminal from cavity A. Cut off the terminal and discard, and tape the bare end of the wire.
