Caprice Wagon RWD V8-305 5.0L (1991)
3.
Mark a location on the centerline 150.Omm (5 7/8") forward of the large retainer plate hole in the spare tire cover (See Illustration).
4.
Remove the cover from the vehicle, locate and mark a spot 35 mm (1 3/8") to the right of the previous mark at 150 mm (See Illustration).
5.
Using a 20 mm (3/4") hole saw, drill a hole at the mark to the right of the centerline.
6.
Using a sharp utility knife, cut a 9 mm (11/32") by 10 mm (13/32") long slot toward the centerline of vehicle and install the new jack handle
retaining bolt, P/N 10165650 in the hole.
7.
Lay the tire cover face down on a clean work surface, and position the new jack handle, P/N 10158395 on the retaining bolt.