chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - Revised Procedure for TV Cable Adjustment|Page 6757 > < Trunk - Will Not Open When Using Remote Release Handle
Page 1
background image

Throttle Valve Cable/Linkage: Technical Service Bulletins
A/T - Revised Procedure for TV Cable Adjustment

File In Section: 7 - Transmission

Bulletin No.: 73-71-05

Date: October, 1997

SERVICE MANUAL UPDATE

Subject:
Revised Procedure for 3T40 TV Cable Adjustment

Models:
1995-96 Buick Century
1995-96 Chevrolet Beretta, Corsica
1995-98 Chevrolet Cavalier
1995-96 Oldsmobile Cutlass Ciera
1995-97 Pontiac Sunfire with 3T40 (MD9)

This bulletin is being issued to revise the service procedure for adjusting the 3T40 TV cable in Section 7A of the Service Manual.

The Service Manual incorrectly states the procedure to properly perform the adjustment.

The correct procedure should read as follows Tools Required: 17 mm Socket, Torque Wrench 

A/T - Revised Procedure for TV Cable Adjustment|Page 6757 > < Trunk - Will Not Open When Using Remote Release Handle