Celebrity V6-173 2.8L (1989)
2. Hold outer pad against caliper with suitable clamp or by applying moderate pressure on brake pedal.
3. Position a ball peen hammer on outboard shoe tab, then using a larger brass hammer, lightly tap the ball peen hammer to bend the outboard shoe
tab. Tabs must be bent around casting to approximately 45°.
4. After both tabs have been bent pressure should be released and outboard shoe should be locked into position.
CAUTION: If an outboard shoe is removed from the caliper, or the tabs unclinched for any reason, then it will be necessary to replace the shoe
and lining assemblies. Do not re-clinch outboard shoe locking tabs after having removed shoe from caliper.
Spring Mount
Spring Mounted Outboard Pad
1.
Lubricate new bushings with suitable grease, install bushings in caliper grooves, then insert sleeves through bushings.
2.
Install retaining spring onto inboard shoe and lining assembly then install inboard shoe into caliper housing.
3.
Install outboard shoe and lining assembly into caliper housing ensuring wear sensor is properly positioned. Ensure buttons on shoe are properly
engaged in holes in caliper.
4.
Install caliper assembly.