Flywheel: Specifications (page 2 of 2)
- Make
- Chevrolet
- Model
- Cobalt
- Engine
- L4-2.0L SC
- Year
- 2007
- Section
- Flywheel
Transmission and DrivetrainSpecifications · page 2 of 2
Flywheel: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the transmission.
2. Remove the flywheel bolts, and note the position of the flywheel to the crank shaft
3. Remove the flywheel.
Installation Procedure
1. Position the flywheel on the crankshaft as previously noted.
Notice: Refer to Fastener Notice.
2. Install the flywheel bolts.
Tighten the flywheel bolts to 53 N.m (39 lb ft) plus 25 degrees.
3. Install the transmission.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2007 Chevrolet Cobalt 2.0L
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.