Cobalt L4-2.0L SC VIN P (2005)
8. Install the electrical center nuts (1,2) and bolts (3).
^
Tighten the nut to 10 Nm (89 inch lbs.).
^
Tighten the bolt to 25 Nm (18 ft. lbs.).
9. Connect the surge tank inlet hose to the surge tank.
10. Install the positive battery cables (1) to the under hood electrical center.
^
Tighten the positive cable nut to 15 Nm (11 ft. lbs.).
11. Connect the engine control module harness connectors (3,4).
12. Install the under hood electrical center cover.
