Cobalt L4-2.4L VIN B (2006)
Flex Plate: Service and Repair
Engine Flywheel Replacement
^
Tools Required
^
J 38122-A Crankshaft Balancer Holder
^
J 45059 Angle Meter
Removal Procedure
1. If equipped with a automatic transaxle, remove the transaxle.
2. If equipped with a manual transaxle, remove the clutch.
3. Using the J 38122-A, hold the crankshaft balancer.
4. Important: It may be necessary to remove the chamfer (bevel) from the edge of an 18 mm socket in order to get full engagement on the
thin-headed flywheel bolts.
Remove the automatic transaxle flywheel bolts.