Cobalt L4-2.4L VIN B (2006)
![background image](/chevrolet/cobalt/l4-2.4l_vin_b/Page-1436002.png)
5. Important: Do not orientate the flywheel to the crankshaft. It is balanced separately from the engine.
Remove the automatic transaxle flywheel.
6. Important: It may be necessary to remove the chamfer (bevel) from the edge of an 18 mm socket in order to get full engagement on the
thin-headed flywheel bolts.
Remove the manual transaxle flywheel bolts.
7. Important: Do not orientate the flywheel to the crankshaft. It is balanced separately from the engine.
Remove the manual transaxle flywheel.
8. Clean the thread adhesive from the flywheel bolt holes. Use a nylon bristle brush to clean the holes in the crankshaft.
Installation Procedure