Colorado 2WD V8-5.3L (2009)
5. Remove the master cylinder reservoir seals (1).
Installation Procedure
1. Lightly lubricate the master cylinder reservoir seals with the recommended brake fluid. Refer to Fluid and Lubricant Recommendations (See:
Maintenance/Service Intervals).
2. Install the master cylinder reservoir seals (1).
3. Install the master cylinder reservoir (1) to the master cylinder.
Ensure the 4 locking legs of the master cylinder reservoir fully engage the master cylinder.
4. Connect the brake fluid level indicator switch electrical connector.
5. Fill the master cylinder reservoir with the recommended brake fluid. Refer to Master Cylinder Reservoir Filling (See: Procedures/Master
Cylinder Reservoir Filling).
Master Cylinder Replacement
