Corvette V8-6.2L (2008)
Alarm Horn: Service and Repair
Theft Deterrent Alarm Replacement
Removal Procedure
1. Open the rear compartment.
2. Disconnect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection (6.0L) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (7.0L) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair) .
3. Loosen the screw from the theft deterrent alarm.
4. Lift the alarm from the bracket.
5. Disconnect the electrical connector and remove the alarm.
Installation Procedure