Corvette V8-6.2L (2008)
Parking Brake Actuator: Service and Repair
Parking Brake Actuator Replacement
Removal Procedure
1. Remove the rear brake rotor. Refer to Rear Brake Rotor Replacement (See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal
and Replacement/Rear Brake Rotor Replacement) .
2. Rotate the park brake adjuster nut until the bolt is in the closed position.
3. Remove the park brake shoe retaining spring.
4. Remove the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe from the actuator assembly.
5. Remove the two actuator mounting bolts.
6. Remove the actuator assembly from the dust shield.
Installation Procedure
