Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Corvette V8-6.2L (2008)

Engine, Cooling and Exhaust > Cooling System > Coolant Reservoir > Component Information > Service and Repair > Radiator Surge Tank Inlet Hose/Pipe Replacement > Page 2622

Page 1
background image

Coolant Reservoir: Service and Repair
Radiator Surge Tank Outlet Hose/Pipe Replacement

Radiator Surge Tank Outlet Hose/Pipe Replacement 

Tools Required

J 38185 Hose Clamp Pliers

Removal Procedure

1. Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716)  (See: Service and Repair)Cooling System Draining and

Filling (Static Fill)  (See: Service and Repair) .

2. Remove the radiator support. Refer to Radiator Support Replacement  (See: Radiator/Service and Repair) .

3. Disengage tension on the surge tank outlet hose clamp at the surge tank using the J 38185  .
4. Disconnect the surge tank outlet hose from the surge tank.

5.

Disconnect the surge tank outlet hose assembly from the support tabs on the cooling fan shroud.

Engine, Cooling and Exhaust > Cooling System > Coolant Reservoir > Component Information > Service and Repair > Radiator Surge Tank Inlet Hose/Pipe Replacement > Page 2622

[PREV PAGE] [NEXT PAGE]