Corvette V8-6.2L (2008)
Turn Signal Switch: Service and Repair
Turn Signal Multifunction Switch Replacement
Removal Procedure
1. Remove the upper and lower steering column trim covers. Refer to Steering Column Trim Covers Replacement (Telescoping) (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Steering Column Trim Covers Replacement (Telescoping))Steering Column Trim
Covers Replacement (Manual) (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column Trim Covers
Replacement (Manual)) .
2. Remove the wire harness straps (2) from the steering column tilt head assembly (1) and the column.
3. Remove the wire harness assembly (1) from the wire harness strap (2).
4. Remove the 2 pan head tapping screws (1).