Corvette V8-6.2L (2008)
Canister Vent Valve: Service and Repair
Evaporative Emission Canister Vent Solenoid Valve Replacement
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Service Intervals) .
2. Disconnect the evaporative emission (EVAP) canister valve harness connector.
3. Disconnect the vent hose (2) from the EVAP canister vent valve (1).
4. Remove the EVAP canister vent valve (2) from the vent bracket (1).
Installation Procedure
1. Install the EVAP canister vent valve (2) to the vent bracket (1).
2. Connect the vent hose (2) to the EVAP canister vent valve (1).
3. Connect the EVAP vent valve electrical connector.
4. Lower the vehicle.