Chevrolet Workshop Manuals
Corvette V8-6.2L (2008)
Powertrain Management > Fuel Delivery and Air Induction > Fuel Injector > Component Information > Diagrams > Diagram Information and Instructions > Page 4969
7. Release the tabs that are holding the wiredress cover to the connector body.
connector. J 38125-216 can also be used to remove the nose piece.
9. Use the J 38125-12A (GM P/N 12094429) tool to release the terminals by lifting the terminal retaining tabs on the inside of the connector. See the
release tool cross reference in the Reference Guide of the J-38125 to ensure that the correct release tool is used.
|[PREV PAGE] [NEXT PAGE]|