Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Corvette V8-6.2L (2008)

Sensors and Switches > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Service and Repair > Inflatable Restraint Front End Sensor Replacement > Page 1227

Page 2
background image

1. Install the sensor to the vehicle.

Notice:  Refer to Fastener Notice  (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .

2. Install the retaining bolts to the inflatable restraint side impact sensor.

Tighten the bolts to 9 N.m (80 lb in).

3. Install the front side door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side  (See: Body and Frame/Doors, Hood and

Trunk/Doors/Front Door/Front Door Panel/Service and Repair) or Front Side Door Trim Panel Replacement - Right Side  (See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair) .

4. Enable the SIR system. Refer to SIR Disabling and Enabling  (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air

Bag(s) Arming and Disarming/Service and Repair) .

Sensors and Switches > Sensors and Switches - Restraint Systems > Impact Sensor > Component Information > Service and Repair > Inflatable Restraint Front End Sensor Replacement > Page 1227

[PREV PAGE] [NEXT PAGE]