Corvette V8-7.0L (2007)
Notice: Prying against the folding top rails could result in damage to parts.
1. Roll back the front and rear corners of the top cover. Refer to Folding Top Cover Replacement.
2. Position the folding top with the number one bow and the number five bow up, to access fasteners and minimize tension on pins and linkage.
3. Remove the number two and three link spring flex clips (1).
4. Remove the number two and three link pins (2).
5. Remove the number two and three link.
Installation Procedure
1. Install the number two and three link.
2. Install the number two and three link pins (2).
3. Install the number two and three link spring flex clips (1).
4. Install the front and rear corners of the top cover.
5. Ensure that the folding top is in align with the door windows.
Folding Top Number 3 and Number 4 Bow Link Replacement
