Corvette V8-7.0L (2007)
Folding Top Number 3 and Number 4 Bow Link Replacement
Removal Procedure
Notice: Prying against the folding top rails could result in damage to parts.
1. Roll back the front and rear corners of the top cover. Refer to Folding Top Cover Replacement.
2. Position the folding top with the number one bow and the number five bow up, to access fasteners and minimize tension on pins and linkage.
3. Remove the number three and four link spring flex clips (1).
4. Remove the number three and four link pins (2).
5. Remove the clip from the three and four link (3).
6. Remove the number three and four link (4).
Installation Procedure
1. Install the number three and four link (4).