Corvette V8-7.0L (2007)
6. Remove the right rear wheelhouse panel.
7. Remove the EVAP canister access cover.
8. Disconnect the EVAP purge pipe at the canister.
9. Remove the rear EVAP purge pipe.
Installation Procedure
Caution: Refer to Fuel and EVAP Pipe Caution.
1. Route the EVAP purge pipe through the right tunnel brace opening.
2. Connect the EVAP purge pipe to the canister.
3. Remove the cap from the chassis EVAP purge pipe.
4. Connect the rear EVAP purge pipe (1) to the chassis EVAP purge pipe (3).
