Corvette V8-7.0L (2007)
Fuel Filler Hose: Service and Repair
Filler Tube Replacement
Filler Tube Replacement
Removal Procedure
1. Remove the fuel filler cap.
2. Remove the left rear wheelhouse panel.
3. Disconnect the fuel fill hose (1) and the vent hose (2) from the fuel tank fill and vent pipe.
4. Cap the open ends of the fuel fill hose (1) and the vent hose (2).
5. Disconnect the fuel system ground strap.
6. Remove the fuel tank fill and vent pipe from the fuel filler pocket.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the fuel tank fill and vent pipe to the fuel filler pocket.
Tighten the fuel tank fill and vent pipe bolts to 3.0 N.m (22 lb in).
