Corvette V8-7.0L (2007)
Tighten the nuts, using hand tools only, to 110 N.m (81 lb ft).
6. Install the brake pipe bracket for the left front brake caliper to the crossmember.
7. Install the plastic brake pipe hold-down for the right front brake pipe.
8. Install the brake BPMV bracket.
9. Install the power steering pressure hose to the power steering gear.
Tighten the fittings to 27 N.m (20 lb ft).
10. Install the power steering return hose to the power steering gear.
Tighten the fittings to 27 N.m (29 lb ft).
11. Install the power steering hold-downs to the crossmember.
12. Install the stabilizer shaft to the crossmember.
13. Connect the intermediate shaft to the power steering gear.
14. Connect the height sensor arm to the control arm.
15. Connect the tie rod ends to the steering knuckles.
16. Install the tires and wheels.
17. Lower the vehicle.
18. Bleed the power steering system.
19. Adjust the front wheel toe. Refer to Front Toe Adjustment.
