Corvette V8-7.0L (2007)
Steering Gear: Service and Repair
Rack and Pinion Boot Replacement
Rack and Pinion Boot Replacement
Tools Required
J 22610 Keystone Clamp Pliers
Removal Procedure
1. Remove the outer tie rod.
2. Remove the nut (5) from the inner tie rod assembly.
3. Remove the tie rod clamp (4).
4. Use side cutters to remove the boot clamp (2).
5. Discard the boot clamp.
6. Remove the rack and pinion boot (3).
Installation Procedure
1. Install the new boot clamp (2) onto the rack and pinion boot (3).
2. Apply grease to the inner rod (2) and apply grease to the gear assembly (1) prior to the boot (3) installation.