Corvette V8-7.0L (2007)
4. Disconnect the differential cooler line from the differential cooler.
5. Remove the differential cooler fitting from the differential cooler.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the differential cooler fitting to the differential cooler.
*
Tighten the 1/2 in fitting to 28 N.m (21 lb ft).
*
Tighten the 3/8 in fitting to 18 N.m (13 lb ft).
2. Connect the differential cooler line to the differential cooler.
3. Fill the differential fluid. Refer to Lubricant Level Inspection - Rear Drive Axle.
4. Remove the drain pan from under the vehicle.
5. Raise and secure the rear of the exhaust system.
6. Lower the vehicle. Refer to Vehicle Lifting.
Differential Cooler Adapter Nut Replacement
Differential Cooler Adapter Nut Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Lower and support the rear of the exhaust system.
3. Install a drain pan under the vehicle.