Corvette V8-7.0L (2007)
*
Worn or damaged splines (1)
*
Damaged bolt hole threads (2)
14. Inspect the bearing housing for the following conditions:
*
Damaged O-ring or snap ring grooves (1-2)
*
Damaged threads (3)
*
Worn or scored bearing bores
15. Inspect the bearings for the following conditions:
*
Damaged grease seals
*
Excessive wear or roughness of operation
Bearings should rotate freely with no coarseness or rough feel
16. Inspect for bent or broken snap rings (1) and replace, as required.
17. Inspect the driveline tube for the following conditions:
*
Damaged bolt hole threads
*
Damaged front O-ring groove
*
Worn or scored front bearing bore
*
Missing or damaged bellhousing dowel pins
*
Damage to the exterior of the tube
*
Cracked welds
Driveline Support Assembly Assemble
Driveline Support Assembly Assemble
Rear Bearing Housing Assembly - Manual Transmission
