Corvette V8-7.0L (2007)
8. Press the flex plate spindle, with bearing (1), into the housing (2). Support the inner race of the housing bearing when assembling the components.
9. Install the hub (1) onto the flex plate spindle. Align the marks on the flex plate spindle and hub for proper assembly.
10. Apply threadlock GM P/N 12345382 (Canadian P/N 10953489), or equivalent, to the threads of the spindle.
Notice: Refer to Fastener Notice.
11. Install the nut (1) to the flex plate spindle.
Tighten the spindle nut to 90 N.m (66 lb ft).
Propeller Shaft Installation
Important: Install the propeller shaft bushing into hub with the smaller opening of the bushing positioned away from the flange.
1. Install a NEW bushing (1) into the automatic transmission propeller shaft, if required.
