Cruze L4-1.4L Turbo (2011)
7. Install and tighten 2 wiring harness bracket bolts (4) to 9 Nm (80 lb in).
8. Tighten wiring harness retainer (1) to steering gear.
9. Connect 2 wiring harness plugs (3).
10. Install the front bumper energy absorber bracket bolt.
11. Install the front transmission mount bolt (1) and tighten to 100 Nm (74 lb ft).
12. Install the rear transmission mount bracket bolt (2) and tighten to 100 Nm (74 lb ft).
13. Install the outer tie rods and tie rod nuts to the steering knuckles. Refer to Steering Linkage Outer Tie Rod Replacement .
