Cruze L4-1.4L Turbo (2011)
1. Prepare the 2 EN-6086-6 - supports (1) for the installation by tightening the support head in a centered position to the rail with the bolt (2).
2. Install the EN-6086-5 - mounting shaft (3) along with the 2 EN-6086-6 - supports (4) and the EN-6086-8 - handle to the cylinder head.
Note: The demounting piece must point to the intake side.
3. Install the EN-6086-7 - lever (2) along with the EN-6086-11 - demounting piece (1) to the mounting shaft.
4. Position the mounting shaft centered above the spark plug bores and tighten the 4 fasteners (6).
5. Install the EN-6086-15 - pneumatic adapter (5) to the spark plug screw bore of cylinder 1.
6. Apply air pressure to cylinder 1.
