Cruze L4-1.4L Turbo (2011)
Note: Removal of timing chain is necessary to get access to engine front cover gasket.
22. Remove the camshaft timing chain. Refer to Camshaft Timing Chain Replacement (See: Timing Chain/Service and Repair).
23. Remove the engine front cover gasket (1).
24. Remove the intake and exhaust camshaft position sensors from the engine front cover. Refer to Engine Front Cover and Oil Pump Disassemble (
See: Service and Repair/Overhaul/53. Engine Front Cover and Oil Pump Disassemble).
Installation Procedure
1. Install the intake and exhaust camshaft position sensors to the engine front cover. Refer to Engine Front Cover and Oil Pump Assemble (See:
Service and Repair/Overhaul/96. Engine Front Cover and Oil Pump Assemble).
2. Clean the engine front cover sealing surfaces on engine block and cylinder head.
Note: The thickness of the sealing bead should be 2 mm (0.0787 in).
3. Apply sealing compound to the shown areas (1) and (2). Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives,
Fluids, Lubricants, and Sealers).
