Equinox AWD V6-3.4L (2008)
17. Remove the engine front cover bolts (2-4).
18. Remove the engine front cover (1).
19. Remove the engine front cover gasket (1).
20. Clean the engine block and front cover gasket sealing surfaces.
Installation Procedure
1. Apply sealer to the lower tabs of the engine front cover gasket. Refer to Sealers, Adhesives, and Lubricants (See: Specifications/Mechanical
Specifications/Sealers, Adhesives, and Lubricants) for the correct part number. Uniformly apply the sealer to both sides of the gasket lower tabs
with the sealant bead being no less than 5.0 mm (0.20 in) wide as shown. Torque front cover immediately after installation of sealer coated gasket.
