Equinox AWD V6-3.4L (2008)
2. Install the gasket (1) to the engine block positioning the gasket on the locating pins (2).
3. Install the engine front cover (1) to the engine block aligning the cover with the locating pins.
Notice: Refer to Fastener Notice .
4. Install the engine front cover bolts (3, 4).
Tighten the bolts to 55 N.m (41 lb ft).
5. Install the engine front cover bolts (2).
Tighten the bolts to 27 N.m (20 lb ft).
6. Install the radiator outlet hose to the engine front cover. Refer to Radiator Outlet Hose Replacement (LNJ) (See: Cooling System/Radiator
Hose/Service and Repair)Radiator Outlet Hose Replacement (LY7) (See: Cooling System/Radiator Hose/Service and Repair) .
7. Install the thermostat bypass hose adapter. Refer to Thermal Bypass Fitting Replacement (See: Cooling System/Coolant Line/Hose/Service and
Repair) .
8. Install the water pump. Refer to Water Pump Replacement (RPO LNJ) (See: Water Pump/Service and Repair)Water Pump Replacement (RPO
LY7) (See: Water Pump/Service and Repair) .